Fujitsu PRIMERGY RX2540 M1 - Concluding Steps

246 Upgrade and Maintenance Manual RX2540 M1
Expansion cards and backup units
Figure 149: Disconnecting the FBU
Ê Press down on the locking latch on the FBU cable and disconnect the FBU
adapter cable.
9.7.3.3 Concluding steps
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê If applicable, "Updating RAID controller firmware" on page 81.
Ê "Enabling SVOM boot watchdog functionality" on page 86