Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê Take the system down to its minimum startup configuration.
Ê "Connecting the server to the power source" on page 66
Ê Connect a keyboard, mouse and display to the server.
Ê "Switching on the server" on page 67
V CAUTION!
Since the fan module is not included in the minimum startup
configuration, the server must be shut down immediately after the
diagnostic process is complete (POST phase has been passed).
The minimum startup configuration must be used exclusively for
diagnostic purposes by maintenance personnel, never in daily
operation!
Front panel module
Power supply unit
Cable Notes
Front panel cable
Power cable
Table 6: Minimum startup configuration - cables
Component Notes
Table 5: Minimum startup configuration - components
To Next Page
Loading...
