Fujitsu PRIMERGY RX2540 M7 - Page 15

12 Liquid cooling (LC) 375
12.1 Safety notes 375
12.2 Basic information 375
12.3 Replacing the CPU for LC device 376
13 Accessible drives 389
13.1 Safety notes 389
13.2 Basic information 389
13.3 Optical disk drive (ODD) 391
13.3.1 Storing the ODD latch 391
13.3.2 Installing the ODD (2.5-inch chassis) 391
13.3.3 Removing the ODD (2.5-inch chassis) 396
13.3.4 Replacing the ODD (2.5-inch chassis) 400
13.3.5 Installing the ODD (3.5-inch chassis) 402
13.3.6 Removing the ODD (3.5-inch chassis) 411
13.3.7 Replacing the ODD (3.5-inch chassis) 419
13.4 LTO drive 420
13.4.1 Installing the LTO drive 420
13.4.2 Removing the LTO drive 428
13.4.3 Replacing the LTO drive 435
13.5 RDX drive 437
13.5.1 Installing the RDX drive 437
13.5.2 Removing the RDX drive 445
13.5.3 Replacing the RDX drive 453
14 Thermal sensor 455
14.1 Replacing the thermal sensor 455
Content
RX2540 M7 Upgrade and Maintenance Manual