Fujitsu PRIMERGY RX2540 M7 - Page 16

15 Front panel 463
15.1 Safety notes 463
15.2 Basic information 463
15.3 Common operation panel (COP) 464
15.3.1 Replacing the COP 464
15.4 Front VGA 470
15.4.1 Installing the front VGA 470
15.4.2 Removing the front VGA 473
15.4.3 Replacing the front VGA 476
16 Additional interfaces 479
16.1 Safety notes 479
16.2 Serial interface 479
16.2.1 Installing the serial interface 479
16.2.2 Removing the serial interface 482
16.2.3 Replacing the serial interface 484
16.3 Rear VGA connector 485
16.3.1 Replacing the rear VGA connector 485
17 System board and components 489
17.1 Safety notes 489
17.2 Basic information 489
17.3 CMOS battery 490
17.3.1 Replacing the CMOS battery 490
17.4 Trusted Platform Module (TPM) 492
17.4.1 TPM kit 492
17.4.2 Position of the TPM 493
17.4.3 Installing the TPM 493
Content
Upgrade and Maintenance Manual RX2540 M7