17.4.4 Removing the TPM 497
17.4.5 Replacing the TPM 501
17.5 iRMC microSD card 504
17.5.1 Note for embedded Lifecycle Management (eLCM) 504
17.5.2 Installing the iRMC microSD card 504
17.5.3 Removing the iRMC microSD card 506
17.5.4 Replacing the iRMC microSD card 507
17.6 System board 510
17.6.1 Replacing the system board 510
18 Appendix A 525
18.1 Mechanical overview 525
18.1.1 Server front 525
18.1.1.1 3.5-inch HDD configuration 525
18.1.1.2 2.5-inch HDD/SSD configuration 526
18.1.2 Server rear 527
18.1.2.1 Servers with air cooling 527
18.1.2.2 Servers with liquid cooling 529
18.1.3 Server interior 530
18.1.3.1 Servers with air cooling 530
18.1.3.2 Servers with liquid cooling (LC) 531
18.2 Connectors and indicators 532
18.2.1 Connectors and indicators on the system board 532
18.2.1.1 System board D3983 532
18.2.2 Server front 537
18.2.2.1 Connectors on the server front 537
18.2.2.2 Indicators on the COP 538
18.2.2.3 States of power-on indicator and time duration during
firmware restore 541
18.2.2.4 Indicator on the ODD 544
18.2.2.5 Indicators on the RDX drive 545
18.2.2.6 Indicators on hot-plug HDD / SSD / PCIe SSD modules 546
18.2.3 Server rear 547
18.2.3.1 Connectors on the server rear 547
Content
RX2540 M7 Upgrade and Maintenance Manual
To Next Page
Loading...
