▶
Place the internal RAID riser module on the three bolts (1).
▶
Push the internal RAID riser module to the front to engage the holes and the
bolts (2).
▶
Fasten the Internal RAID riser module with the knurled screw (see circle).
Installing the RAID controller
▶
Please read the documentation supplied with the RAID controller
.
▶
If applicable, remove the slot bracket from the RAID controller, see
"Removing slot brackets" on page 252.
Figure 172: Installing the RAID controller
Expansion cards and backup units
300 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
