Fujitsu PRIMERGY RX2540 M7 - Page 301

▶
Install the Internal RAID controller in a slight angle. A capacitor under the
Internal RAID controller could interfere with the Internal RAID riser module
and fall of
f.
▶
Carefully press the RAID controller into the riser card slot, until it clicks into
place.
Install the Internal RAID controller in a slight angle into the riser card
slot. Otherwise, a capacitor under the Internal RAID controller could
interfere with the Internal RAID riser module and fall of
f (see circles).
▶
Fasten the RAID controller with two screws (1).
▶
Connect the HDD LED cable (2).
OK
Expansion cards and backup units
RX2540 M7 Upgrade and Maintenance Manual 301