Installing the new riser card
Figure 183: Installing the riser card
▶
Insert the riser card.
▶
Fasten the riser card with four screws (see circles).
▶
Install the expansion card, see "Installing an expansion card" on page
269.
Concluding steps
▶
Install the corresponding riser module, see "Installing a riser module" on
page 74.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
Expansion cards and backup units
RX2540 M7 Upgrade and Maintenance Manual 319
To Next Page
Loading...
