Concluding steps
▶
If applicable, "Installing an expansion card" on page
269.
▶
If applicable, "Installing the riser module 2" on page 75.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
In case of VMware (vSphere 7.0 U3 or later) environment, see "Recovering
the ESXi configuration information encryption functionality" on page 121.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
▶
In case of Windows as operating system, "Resuming BitLocker
functionality" on page 107.
▶
Enable the TPM in the system board BIOS, see "Enabling the TPM in the
system board BIOS" on page 496.
Enabling the TPM in the system board BIOS
▶
Switch on or restart your server.
▶
As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶
Select the Configuration menu.
▶
Select the Security Configuration submenu.
▶
Set the TPM Support setting to Enabled.
▶
Under Pending TPM operation, select the desired TPM operation mode.
▶
Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
System board and components
496 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
