Manually restore an incomplete BIOS or iRMC S6 firmware restore
If the BIOS or iRMC S6 firmware restore has not completed successfully
, you
can restore the BIOS or iRMC S6 firmware manually through the iRMC S6 web
interface.
▶
Log in to the iRMC S6 web interface.
▶
Select the Tools menu.
▶
Open the Update page.
▶
In the BIOS Update group, set Update Source to Memory and click Start
Update. Both the active area and the recovery area can be restored.
▶
In the iRMC Update group, set Update Source to Memory Card and click
Start Update. Both firmware 1 and 2 can be restored.
System board and components
RX2540 M7 Upgrade and Maintenance Manual 523
To Next Page
Loading...
