Fujitsu PRIMERGY TX2550 M5 - Warranty and service; Warranty; Service

Figure 58: Installing the anti-tilt bracket (B)
▶
Fasten the anti-tilt bracket on the rear of the server with two knurled thumb
screws.
4.13.1 Removing the anti-tilt bracket
▶
Loosen the two knurled thumb screws on the anti-tilt bracket (see
Figure 58
).
▶
Remove the anti-tilt bracket from the rear of the server.
Basic hardware procedures
TX2550 M5 Upgrade and Maintenance Manual 105