Fujitsu PRIMERGY TX2550 M5 - Replacing the HDD Backplane on the 4 X 3.5-Inch HDD Extension Box

▶
Carefully pull the 4x 3.5-inch HDD extension box out of its installation bays.
▶
Engage the locking bar
, see "Closing the accessible drive locking bar" on
page
98.
Installing accessible drive dummy covers
▶
Install accessible drive filler covers into empty drive bays, see "Installing
accessible drive filler covers" on page 101.
▶
Install accessible drive covers into the front cover, see "Installing accessible
drive covers" on page 102.
Concluding steps
▶
Install the fan bridge, see "Handling the fan bridge" on page 92.
▶
"Installing the system air duct" on page 68.
▶
"Reassembling" on page 68.
▶
"Connecting the power cord" on page 82.
▶
"Switching on the server" on page 83.
▶
Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page 136. Select the
corresponding system name.
▶
"Resuming BitLocker functionality" on page 130.
7.6.7 Replacing the HDD backplane on the 4x 3.5-inch
HDD extension box
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Hard disk drive (HDD) / solid state disk (SSD)
TX2550 M5 Upgrade and Maintenance Manual 283