Fujitsu PRIMERGY TX2550 M5 - Irmc Microsd Card; Note for Embedded Lifecycle Management (Elcm); Installing the Irmc Microsd Card

14.5 iRMC microSD card
14.5.1 Note for embedded Lifecycle Management (eLCM)
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key from user purchase order and activated through the iRMC
web interface.
For more information, see the “ServerView embedded Lifecycle
Management (eLCM)” user guide.
14.5.2
Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
"Shutting down the server" on page 49
.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 51.
▶
If applicable, remove the riser module, see "Removing the riser module" on
page 86.
System board and components
TX2550 M5 Upgrade and Maintenance Manual 487