Fujitsu PRIMERGY TX2550 M5 - Serial Interface; Safety Notes; Installing the Serial Interface

15 Serial interface
15.1 Safety notes
CAUTION
▶
For more information, see "Important information" on page 33
.
15.2 Installing the serial interface
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: – flat screw driver
– hexagon screw driver 5
mm
The slot brackets contained in the kit are not used in this server.
Preliminary steps
▶
"Shutting down the server" on page 49
.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 51.
TX2550 M5 Upgrade and Maintenance Manual 523