▶
"Connecting the power cord" on page 82
.
▶
"Switching on the server" on page 83.
9.7.5 Installing a TFM
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
Different TFM kits are available, depending on the RAID controller.
Preliminary steps
▶
"Shutting down the server" on page
49
.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 51.
Installing the TFM
▶
If applicable, remove the expansion card, see "Removing the expansion
card" on page 358.
Expansion cards and backup units
372 Upgrade and Maintenance Manual TX2550 M5