Fujitsu PRIMERGY TX2550 M5 - Removing an Expansion Card from a Riser Module

▶
"Resuming BitLocker functionality" on page 130
.
9.7.2 Removing an expansion card from a riser module
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
107
.
▶
"Shutting down the server" on page 49.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 51.
▶
"Removing the riser module" on page 86.
Expansion cards and backup units
366 Upgrade and Maintenance Manual TX2550 M5