Fujitsu PRIMERGY TX2550 M5 - Reassembling; Safety Notes; Installing the System Air Duct

4.5 Reassembling
4.5.1 Safety notes
CAUTION
▶
Before attaching the covers, make sure no unnecessary parts or
tools are left inside the server.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see "Important information" on page 33
.
4.5.2 Installing the system air duct
A
A
Figure 19: Installing the system air duct
Basic hardware procedures
68 Upgrade and Maintenance Manual TX2550 M5