10.3 Installing memory modules
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
Preliminary steps
▶
"Suspending BitLocker functionality" on page 107
.
▶
"Shutting down the server" on page 49.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 51.
▶
"Removing the system air duct" on page 67.
Selecting the memory slot
▶
Choose the memory slot according to the configuration rules, see "Basic
information" on page 394.
Installing a memory module
Figure 257: Opening the securing clips
Main memory
TX2550 M5 Upgrade and Maintenance Manual 401