EasyManuals Logo

Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Fujitsu PRIMERGY TX2550 M5
636 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
2.3 Average task duration
Hardware: 10 minutes
The average task duration including preliminary and concluding steps is
indicated at the beginning of each procedure next to the procedure class.
The following table gives an overview of steps taken into account for
calculating the average task duration.
Step included Explanation
Server shutdown no
Shutdown time depends on hardware and
software configuration and may vary
significantly
.
Software tasks necessary before
maintenance, see "Starting the
maintenance task" on page
107.
Rack removal,
disassembly
yes
Making the server available, removing the
server from the rack (if applicable).
Transport no
Transporting the server to the service table
(where required) depends on local
customer conditions.
Maintenance
procedures
yes
Maintenance procedures including
preliminary and concluding software tasks.
Transport no
Returning the server to its installation site
(where required) depends on local
customer conditions.
Assembly, rack
installation
yes
Reassembling the server, installing the
server in the rack (if applicable).
Starting up no
Booting time depends on hardware and
software configuration and may vary
significantly.
Table 1: Calculation of the average task duration
Before you start
TX2550 M5 Upgrade and Maintenance Manual 29

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2550 M5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX2550 M5 and is the answer not in the manual?

Fujitsu PRIMERGY TX2550 M5 Specifications

General IconGeneral
Tcase78 °C
Scalability2S
Processor cache13.75 MB
Processor cores10
Processor model4210
System bus rate- GT/s
Processor socketLGA 3647 (Socket P)
Processor threads20
Processor codenameCascade Lake
Execute Disable BitYes
Processor frequency2.2 GHz
Processor lithography14 nm
Processor manufacturerIntel
Processor package size76.0 x 56.5 mm
Processor boost frequency3.2 GHz
Processor operating modes64-bit
Supported instruction setsAVX-512
Thermal Design Power (TDP)85 W
Number of processors installed1
Maximum number of PCI Express lanes48
Memory types supported by processorDDR4-SDRAM
Memory clock speeds supported by processor2400 MHz
Maximum internal memory supported by processor1024 GB
Memory slots12
Internal memory16 GB
Memory clock speed2933 MHz
Maximum internal memory1500 GB
HDD size2.5 \
RAID levels0, 1, 5, 6, 10, 50, 60
HDD interfaceSerial ATA, Serial Attached SCSI (SAS)
Optical drive typeNo
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs supported8
Chassis typeTower
Product colorBlack, Red
Operating system installed-
Compatible operating systemsMicrosoft Hyper-V Server 2016 Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2016 Standard Microsoft Windows Server 2016 Essentials Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 R2 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Storage Server 2012 R2 Standard VMware vSphere 6.5 VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Red Hat Enterprise Linux
Power supply800 W
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCB, RoHS, WEEE, GS, CE, CSAc/us, FCC Class A, VCCI, KN32, KN35, CCC, C-Tick
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
PCI Express slots version3.0
On-board graphics card modelNot available
Processor ARK ID193384
Weight and Dimensions IconWeight and Dimensions
Depth177 mm
Width448 mm
Height736 mm

Related product manuals