16 Converting a floorstand model to
a rack model
Field Replaceable Unit
(FRU)
Average task duration: 20
minutes
Tools:
– Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
Safety notes
For more information, see "Important information" on page 33
.
Preliminary steps
▶
"Shutting down the server" on page 49.
▶
"Disconnecting the power cord" on page 50.
▶
Remove all external cables.
▶
"Getting access to the component" on page 51.
The front cover is no longer required.
▶
"Removing the anti-tilt bracket" on page
105.
TX2550 M5 Upgrade and Maintenance Manual 529
To Next Page
Loading...
