9.5.2 Removing an OCP module
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
Preliminary steps
▶
"Shutting down the server" on page 49
.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 51.
▶
If, applicable, remove the riser module, see "Removing the riser module" on
page 86.
Expansion cards and backup units
342 Upgrade and Maintenance Manual TX2550 M5
To Next Page
Loading...
