Fujitsu PRIMERGY TX2550 M5 - Page 176

Position Logical drive
number
ServerView RAID Manager display
name
(Controller ID: Device ID)
[9] 9 Vendor Product (0:9)
[10] 10 Vendor Product (0:10)
[11] 11 Vendor Product (0:11)
Extended configuration with non-hot-plug 2.5-inch HDDs/SSDs
In configurations with up to 12 3.5-inch HDDs it is possible to add up to
two non-hot-plug 2.5-inch HDDs/SSDs.
The non-hot-plug 2.5-inch HDDs/SSDs must be connected to the
connector "X10" on the SAS expander board.
Figure 89: Configuration with up to 2 non-hot-plug 2.5-inch HDDs/SSDs
With SAS expander board and one SAS controller
Position Logical drive
number
ServerView RAID Manager display
name
(Controller ID: Device ID)
[0] 0 Vendor Product (0:0)
[1] 1 Vendor Product (0:1)
Hard disk drive (HDD) / solid state disk (SSD)
176 Upgrade and Maintenance Manual TX2550 M5