Fujitsu PRIMERGY TX2550 M5 - Page 314

▶
"Removing the system air duct" on page 67
.
▶
Remove the fan bridge, see "Handling the fan bridge" on page 92.
Removing the defective SAS expander board
▶
Remove the SAS expander board, see "Removing the SAS expander
board" on page 311.
Installing the new SAS expander board
▶
Install the SAS expander board, see "Installing the SAS expander board" on
page 306.
Concluding steps
▶
Install the fan bridge, see "Handling the fan bridge" on page 92.
▶
"Installing the system air duct" on page 68.
▶
"Reassembling" on page 68.
▶
"Connecting the power cord" on page 82.
▶
"Switching on the server" on page 83.
▶
"Resuming BitLocker functionality" on page 130.
Hard disk drive (HDD) / solid state disk (SSD)
314 Upgrade and Maintenance Manual TX2550 M5