Connecting cables to the ultraslim ODD
Figure 293: Connecting cables to the ultraslim ODD
▶
Connect the power cable to the slimline ODD (1).
▶
Connect the SA
T
A cable to the slimline ODD (2).
Installing the 4x 3.5-inch HDD extension box
▶
Install the 4x 3.5-inch HDD extension box, see "Installing the 4x 3.5-inch
HDD extension box" on page 277.
▶
Connect the SATA cable and the power cable, see Figure 286.
Concluding steps
▶
If applicable, install the expansion card, see "Installing an expansion card"
on page 346.
▶
Install the fan bridge, see "Handling the fan bridge" on page 92.
▶
If applicable, "Installing the riser module" on page 87.
Accessible drives
TX2550 M5 Upgrade and Maintenance Manual 449
To Next Page
Loading...
