Fujitsu PRIMERGY TX2550 M5 - Page 454

▶
If applicable, remove the expansion card, see "Removing an expansion
card" on page 358.
▶
Remove the fan bridge, see "Handling the fan bridge" on page 92
.
▶
If applicable, "Removing the 4x 3.5-inch HDD extension box" on page 281.
Removing the defective ultraslim ODD
▶
Remove the 4x 3.5-inch HDD extension box, see "Removing the 4x 3.5-
inch HDD extension box" on page 281.
▶
Remove the ultraslim ODD, see "Removing the ultraslim ODD from the 4x
3.5-inch HDD extension box" on page 450.
Installing the new ultraslim ODD
▶
Install the ultraslim ODD, see "Installing the ultraslim ODD in the 4x 3.5-
inch HDD extension box" on page 444.
▶
Install the 4x 3.5-inch HDD extension box, see "Installing the 4x 3.5-inch
HDD extension box" on page 277.
Concluding steps
▶
If applicable, install the expansion card, see "Installing an expansion card"
on page 346.
▶
Install the fan bridge, see "Handling the fan bridge" on page 92.
▶
If applicable, "Installing the riser module" on page 87.
▶
"Installing the PCI air duct" on page 89.
▶
"Installing the system air duct" on page 68.
▶
"Reassembling" on page 68.
▶
"Connecting the power cord" on page 82.
▶
"Switching on the server" on page 83.
Accessible drives
454 Upgrade and Maintenance Manual TX2550 M5