▶
If applicable, activate TPM functionality in the system BIOS under Security
> TPM (Security Chip) Setting > Security Chip. For more information, see
the corresponding BIOS Setup Utility reference manual.
▶
"Verifying the system time settings" on page
126.
▶
"Looking for MAC/WWN/GUID and SAS addresses" on page 132.
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 129.
▶
"Resuming BitLocker functionality" on page 130.
▶
If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
Configuration of network settings should be performed by the
customer. For more information, see
"Note on network settings
recovery" on page 515.
▶
If applicable, restore LAN teaming configurations, see "After replacing a
system board".
System board and components
TX2550 M5 Upgrade and Maintenance Manual 521
To Next Page
Loading...
