EasyManua.ls Logo

GE Mark VIeS - Component Editor

GE Mark VIeS
486 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.3.4 Component Editor
8.3.4.1 Parameters
Parameter Description
Choices
SystemLimits Allows user to temporarily disable all system limit checks for testing purposes.
Setting this parameter to Disable will cause a diagnostic alarm to occur.
Enable (default)
Disable
OperatingMode Enhanced enables enhanced algorithms for YVIBS1B that are not compatible
with YVIBH1A, including Low Latency Peak-Peak Algorithm and Vibration
RMS Algorithm
Legacy (default)
Enhanced
Vib_PP_Fltr First order filter time constant (sec) cannot be disabled 0.01 to 2
(default is 0.10)
MaxVolt_Prox Maximum Input Volts (pk-neg), healthy Input, Prox -4 to 0
(default is -1.5)
MinVolt_Prox Minimum Input Volts (pk-neg), healthy Input, Prox -24 to -16
(default is -18.5)
MaxVolt_KP Maximum Input Volts (pk-neg), healthy Input, Keyphasor -4 to 0
(default is -1.5)
MinVolt_KP Minimum Input Volts (pk-neg), healthy Input, Keyphasor -24 to -16
(default is -22.0)
MaxVolt_Seis Maximum Input Volts (pk-pos),healthy Input,Seismic:Values > 1.25 require
use of GnBiasOvride
0 to 2.75
(default is 1.0)
MinVolt_Seis Minimum Input Volts (pk-neg),healthy Input,Seismic:Values < -1.25 require
use of GnBiasOvride
-2.75 to 0
(default is -1.0)
MaxVolt_Acc Maximum Input Volts (pk),healthy Input,Accel -12 to 1.5
(default is -8.5)
MinVolt_Acc Minimum Input Volts (pk-neg),healthy Input,Accel -24 to -1
(default is -11.5)
MaxVolt_Vel Maximum Input Volts (pk),healthy Input,Velomitor -12 to 1.5
MinVolt_Vel Minimum Input Volts (pk-neg),healthy Input,Velomitor -24 to -1
MaxVolt_CDM_BN Maximum Input Volts (pk),healthy Input,CDM Bently Nevada -12 to 24
MinVolt_CDM_BN Minimum Input Volts (pk-neg),healthy Input,CDM Bently Nevada -24 to 12
MaxVolt_CDM_PCB Maximum Input Volts (pk),healthy Input,CDM PCB -12 to 24
MinVolt_CDM_PCB Minimum Input Volts (pk-neg),healthy Input,CDM PCB -24 to 12
CDM_Scan_Period The scan period for CDM sensor inputs in seconds
Only assign as 0.01 increments
0.01 to 2.0
262 GEH-6855_Vol_II GEH-6855_Vol_II Mark VIeS Functional Safety Systems Volume II
Public Information

Table of Contents

Related product manuals