GE Mark VIeS - Default Sensor Gain and Bias

8.3.2.6 Default Sensor Gain and Bias
Each sensor has a default Gain and DC Sensor bias which is based on firmware requirements. These values are chosen based
on sensor data sheets and traditional field usage.
Sensor Type
Default Gain
Default Snsr_Offset Vin
Min (Volts) VinMax (Volts)
PosProx 1x 9 -19 1
VibLMAccel 2x 10 -15 -5
VibProx 1x 9 -19 1
VibProx_KPH1
1x 9 -19 1
VibProx_KPH2
1x 9 -19 1
VibSeismic 4x 0 -2.5 2.5
VibVelomitor 2x 12 -17 -7
Keyphasor
1x 9 -19 1
CDM_BN_Chg_Amp
2x 10 -15 -5
CDM_PCB_Chg_Amp
2x -12 7 17
GnBiasOvride = TRUE G S
((-10V/G) - S) ((10V/G) - S)
240 GEH-6855_Vol_II GEH-6855_Vol_II Mark VIeS Functional Safety Systems Volume II
Public Information