GE Mark VIeS - JPDC-P28 V-R Contact Input (JR Connector) Indicates PS Problem; JPDC-P28 V-S Contact Input (JS Connector) Indicates PS Problem

To Next Page

To Previous Page

187

Description JPDC-P28v-R contact input (JR connector) indicates PS problem.

Possible Cause

• The power supply contact is open. The power supply is not operating normally.

• The power supply contact feedback is not connected to the specified terminal board connector.

• The power supply dry contact is not used.

Solution

• Verify the status of the power supply contact, and that the power supply is operating correctly.

• Verify the connections between the power supply and the specified connector on the JPDC.

• The input is not used. Set PS28vEnable to Disable.

• The power supply is used, but the dry contact feedback is not connected. Set PS28vEnable to NoDryCnt to disable this

alarm, but continue to monitor the 28 V power supply input.

188

Description JPDC-P28v-S contact input (JS connector) indicates PS problem.