Introduction
2
Thank you for purchasing the HIOKI "Model 8847 Memory HiCorder". To obtain maximum performance
from the instrument, please read this manual carefully, and keep it handy for future reference.
The following documents are provided with this instrument. Refer to them as
appropriate for your application.
Registered
trademarks
• Windows is a registered trademark of Microsoft Corporation in the United
States and/or other countries.
• CompactFlash is a registered trademark of Sandisk Corporation (USA).
When you receive the instrument, inspect it carefully to ensure that no damage occurred during
shipping. In particular, check the accessories, panel switches, and connectors. If damage is evident,
or if it fails to operate according to the specifications, contact your dealer or Hioki representative.
Introduction
Document Description
1
Measurement
Guide
Read first.
Offers an introduction to the Memory HiCorder's basic mea-
suring method for first time users.
2
Instruction Manual
(This document)
Contains explanation and instructions regarding the instru-
ment's operating method and functions.
Confirming Package Contents
Confirm that these contents are provided. (One each)
Instruction Manual
Measurement Guide
Application CD ( p.277)
The latest version can be downloaded
from our web site.
8847 Memory HiCorder
Accessories
Power Cord
Input Cable Labels
USB Cable
9231 Recording Paper
Paper Roll Axle
Ferrite clamp-on choke
(for LAN/USB Cable)
Other options specified when
ordered
See: Options List ( p. A10)
If the 8967 TEMP Unit is installed in the 8847, two ferrite clamp-on chokes
(small) will be supplied per unit.
To Next Page
Loading...