Hioki 8847 - 1.4 Basic Key Operations

1.4 Basic Key Operations
14
1 Press the CURSOR key and move the cursor to the item on screen which you
want to change.
2 Check the GUI illustration and press the function key (F key) for the setting that
you want to change.
The assignment of the F keys will be different for each item.
3. For some setting items, the CH.SET key selects [Exec] and the TRIG.SET key
selects [Cancel].
1.4 Basic Key Operations
GUI
Selecting a setting item
Press the F key to change the setting item.
When there are more than six setting items, press F5
[Next Page] to switch to the next page.
Increasing or decreasing a setting value
Press F key to change the setting value.
Increase value quickly
Decrease value quickly
To enter text or numbers
See: "8.1.3 Alphanumeric Input" ( p.121)