18.6 Disposing of the Instrument (Lithium Battery Removal)
323
Chapter 18 Maintenance and Service
14
18
The instrument contains a lithium battery for memory backup. Remove this battery before disposing of the
instrument.
Procedure ____________________________________________________
Required tools:
Slotted screwdriver, Phillips screwdriver, wire cutter: One each
Box wrench or long-nosed pliers
1. Verify that the power is off, and remove the connection cables and power cord.
2. Remove the screws and each parts as indicated in the next page diagram.
3. Pull the lithium battery up from the circuit board, and cut the two leads with a
wire cutter.
4. Remove the battery from the board.
18.6 Disposing of the Instrument (Lithium Battery
Removal)
• To avoid electric shock, turn off the power switch and disconnect the power
cord and connection cords before removing the lithium battery.
• Keep batteries away from children to prevent accidental swallowing.
• Battery may explode if mistreated. Do not short-circuit, recharge, disassemble
or dispose of in fire.
When disposing of this instrument, remove the lithium battery and dispose of
battery and instrument in accordance with local regulations.
To Next Page
Loading...