Hioki 8847 - Making Detailed Settings for Input Modules

8.10 Making Detailed Settings for Input Modules
140
Using the [Each Ch] sheet accessed from the Channel screen, you can make detailed settings.
Logic channel allocation when using Standard LOGIC terminals
*: Ch1 - Ch4 provide 12-bit precision when logic channels LA - LD are used.
When Ch1 to Ch4 are 8970 Freq Unit and standard logic channels LA to LD
are used, the units of corresponding channels can no longer be used.
8.10 Making Detailed Settings for Input Modules
Select the
channel.
Shows the chan-
nel number and
channel position.
Press this key.
Opening the [Each Ch] sheet, Making a Channel Selection
Module
Memory for each channel (16 bits)
4 bits 4 bits 4 bits 4 bits
Ch1*
Analog
Analog Ch1
LA
Ch2* Analog Ch2
LB
Ch3*
Logic
L2A L2B
-
LC
Ch4* L2C L2D
LD
Ch5
Analog
Analog Ch5
Ch6 Analog Ch6
Ch7
Logic
L4A L4B
-
Ch8 L4C L4D
Ch9
Analog
Analog Ch9
Ch10 Analog Ch10
Ch11
Analog
Analog Ch11
Ch12 Analog Ch12
Ch13
Analog
Analog Ch13
Ch14 Analog Ch14
Ch15
Analog
Analog Ch15
Ch16 Analog Ch16