Hioki 8847 - Alphanumeric Input; Entering Text

8.1 Adding Comments
121
8
Chapter 8 Utility Functions
Move the cursor to the setting item for which to make the input, and choose the content with the F keys.
1. Move the cursor to the comment field and select [Enter Char].
A virtual keyboard appears.
2. Select a character with the CURSOR key from the virtual keyboard, and select
[Enter Char] to enter it.
3. Select [Confirm] to accept the entry.
Press the ESC key to cancel the input.
(Pressing the ESC key again closes the virtual keyboard)
8.1.3 Alphanumeric Input
Entering Text
RESET: Deletes all entered characters (Move the cursor to the RESET, and push the [Enter Char].)
SPACE: Inserts a space (Move the cursor to the SPACE, and push the [Enter Char].)
OVWR/INS: Toggles between Overwrite (OVWR) and Insert (INS) mode (Move the cursor to the
[OVWR/INS], and push the [Enter Char] to switch OVWR/INS)
<<: Move the character input position left.
>>: Move the character input position right.
Character input position
Move with Jog knob, or << >>.
Character selection cursor
Move with CURSOR keys.
Entering units and symbols
Characters entered at the unit may be saved differently.
Save (saving of numerical calculation results or text format information)
2
→ ^2,
3
→ ^3 , μ→ ~u, Ω→ ~o, ε → ~e, °→ ~c ,
±
→ ~+, με (display only)→uE, °C (display only)→ C
Characters not allowed in the file name have been detected. (Please use only
uppercase letters.)