Hioki 8847 - 8.4 Setting Channels to Use (Extending the Recording Length)

117
8
Chapter 8 Utility Functions
Various utility functions are described in the section.
Utility Functions Chapter 8
Adding Comments ( p.118)
Applicable measurements and settings
• Displaying Waveforms During Recording
(
 p.124)
• Overlaying with past recorded waveforms
(
 p.125)
Utility Functions
Converting input values (Scaling) ( p.128)
Detailed input module settings ( p.140)
• Making anti-aliasing filter settings
• Selecting the thermocouple type
• Making reference point compensation settings
• Making wire break detection settings
• Making data updating settings
• Executing auto balance
• Making probe attenuation settings
• Making response settings
• Making measurement mode settings
Setting the channels to use
(Making recording length longer) ( p.127)
Copying a setting to another channel( p.139)
Fine Adjustment of Input Values ( p.137)
Inverting a waveform ( p.138)
Setting the waveform display freely( p.134)