Hioki 8847 - Chapter 9 Trigger Settings

151
9
Chapter 9 Trigger Settings
Triggering is the process of controlling the start and stop of recording by specific signals or condi-
tions (criteria). When recording is started or stopped by a specific signal, we say the trigger is
"applied" or "triggering occurs".
Trigger settings are made in the Trigger settings window of the Waveform screen.
For the X-Y Recorder function, trigger settings cannot be made.
Trigger Settings Chapter 9
Pressing [TRIG.SET] key repeat-
edly displays the various sheets.
[Analog Trig]
[Logic Trig]
No display
Opening theTrigger settings window
Trigger Settings
• Trigger mode setting ( p.153)
• Combining logic (AND/OR) for multiple trigger
sources (
 p.170)
• Pre-trigger settings (
 p.166)
• Trigger timing settings (
 p.169)
Analog Trigger Settings ( p.154)
• Level trigger
• Window trigger
• Period trigger
• Glitch trigger
• Slope trigger
Logic Trigger Settings ( p.160)
• Setting combining logic for logic triggers
• Trigger filter settings
• Trigger pattern settings
Manual Trigger Settings ( p.165)
Trigger Source Settings
Trigger Output ( p.292)
Operations available from the Trigger settings window
External Trigger Settings ( p.165)
Timer Trigger Settings ( p.162)
Searching for trigger positions ( p.171)