Hioki 8847 - 5.2.1 Save Types and Workflow

4.1 Measurement Workflow
60
4.1 Measurement Workflow
2 Make basic settings for measurement
Determine screen layout format
Select X-Y recorder as measurement function
Set sampling rate
Determine whether to perform waveform interpola-
tion
See:
"Function" (
 p.61)
"Sampling" (
 p.61)
"Format" (
 p.61)
"Dots-Line (interpolation)" (
 p.61)
3 Input Channel Settings
Make analog channel settings
See:
"3.5.2 Analog Channel" (
 p.52)
Logic channels cannot be used.
Application examples
See:
"8.6 Variable Function (Setting the Waveform Display Freely)" (
 p.134)
"8.7 Fine Adjustment of Input Values (Vernier Function)" (
 p.137)
"8.1 Adding Comments" (
 p.118)
"8.5 Converting Input Values (Scaling Function)" (
 p.128)
Determine whether to clear previous waveform
data
"Disp Clear" ( p.61)
1 Pre-Measurement Inspection
See:
"3.3 Pre-Measurement Inspection" (
 p.40)
4 Starting Measurement
See:
"4.3 Starting and Stopping Measurement" (
 p.62)
"7.1 Reading Measurement Values (Using the A/B Cursors)" (

p.102)
5 Stopping Measurement
See:
"4.3 Starting and Stopping Measurement" (
 p.62)
"4. Redrawing Waveforms" (
 p.62)
"5.2.3 Saving Data Selectively (SAVE Key)" (
 p.74)
"6.3 Manual Printing With PRINT key (Selective Printing)" (
 p.93)
With the X-Y recorder func-
tion, the following operations
are not available.
• Trigger setting
• Auto saving
• Auto printing