7.6 Monitoring Input Levels (Level Monitor)
113
7
Chapter 7 Waveform Screen Monitoring and Analysis
All input waveform levels can be monitored in real time.
Analog channels and logic channels can be displayed at the same time.
7.6 Monitoring Input Levels (Level Monitor)
Procedure
To open the Menu: Press the DISP key → Display Menu
Monitor values of analog and logic channels
Analog channel
level display
To hide the level monitor:
Select [Monitor] again.
Selecting [Monitor] brings up the analog chan-
nel level display in the left part of the Waveform
screen, and the logic channel level display in the
right part of the Waveform screen.
Display format 2 - 8 screens ( p.48)
Level monitors are displayed for each graph.
Upper and lower limit indication is combined with
level monitor.
See: "7.7.1 Showing Upper/Lower Limit On Waveform
Screen" (
p.114)
Logic channel
level display
Level display of an analog channel
High
Hi gh& Low
Low
Input
Level
Waveform Display
Range Full Span
Level display of logic channels
How to View a Level Monitor
When the display setting is On,
the part indicated in white takes
the color specified for the wave-
form display. When the setting is
Off, the part becomes gray. The
part indicated in black takes the
background color.
• Input levels are not displayed for channels having no corresponding input mod-
ule installed.
• Channels higher than the number specified for [Used Ch] do not display the
analog input level.
(Example: When [Used Ch] is set to [Ch1-4], the level for channel 5 and
higher numbers is not displayed.)
To Next Page
Loading...