Hioki 8847 - 15.7.1 Making Settings on the Instrument

15.3 Accessing the Files on the Instrument From a Computer (Using FTP)
273
12
Chapter 15 Connection to a Computer
15
15.3.1 Making FTP Settings at the Instrument
1
2
3
3
Procedure
To open the screen: Press the SYSTEM key → [Interface] sheet
1
Set the access restrictions.
Move the cursor to the [Access Ctrl] item.
Select
2
Make authorization settings.
Move the cursor to the [Authorization] item.
Select
3
When [On] is selected
Set up a user name and password.
Move the cursor to the [User Name] and [Password] items
and enter suitable information.
See: "8.1.3 Alphanumeric Input" ( p.121)
"Authorization User Name and Password" (
 p.261)
4
Apply the settings.
Move the cursor to the [Reset] item.
Select [Reflect Set].
The indication "LAN was reconnected" appears at the bottom of the screen.
Read/
Write
Writing to the media of the instrument (uploading), and file de-
letion and renaming are permitted.
Read-
Only
File reading only is permitted. This prevents files from being
deleted or changed from outside the instrument.
Off Web server authentication is not used. (default setting)
On
Web server authentication is used.
The user name and password for au-
thentication are the same for the Internet
browser and for FTP.