8.1 Adding Comments
122
While the virtual keyboard is displayed, pressing the WAVE key brings up a
"Term List" and pressing the AB CSR key brings up a "History List".
This can be used to enter preset terms or reuse text from a previous input session.
1. Move the cursor to the comment field and select [Enter Char].
The virtual keyboard appears.
2. (To select from preset terms)
Press the WAVE key.
A list of preset terms appears.
(To select from past input)
Press the AB CSR key.
A History list appears.
Press the ESC key to cancel selection from the history list.
3. Use the CURSOR keys or the Jog knob to select a term from the list, and
select [Enter Char].
4. Select [Confirm] to accept the entry. The virtual keyboard disappears.
To return the edited field to the original condition, select [Undo].
Entering Text From a Term List Or History List
To Next Page
Loading...