Appendix 3 About Options
A11
Appendix
* : Not applicable to CE Marking
AC/DC
Following item (1) or (2) is
required for connection
9277 Universal Clamp-On CT
(1),(2)
20 A, DC to 100 kHz
9278 Universal Clamp-On CT
(1),(2)
200 A, DC to 100 kHz
9279 Universal Clamp-On CT*
(1),(2)
500 A, DC to 20 kHz
9709 AC/DC Current Sensor
(1),(2)
500 A, DC to 100 kHz
CT6862 AC/DC Current Sensor 50 A
CT6863 AC/DC Current Sensor 200 A
For AC
Following item (1) or (2) is
required for connection.
9272 Clamp-On Sensor*
(1),(2)
20/200 A, 1 Hz to 100 kHz
For AC
9010-50 Clamp-On Probe 10 to 500 A, 40 Hz to 1 kHz
9018-50 Clamp-On Probe 10 to 500 A, 40 Hz to 3 kHz
9132-10 Clamp-On Probe* 20 to 1000 A, 40 Hz to 1 kHz
For Leakage Current
9657-10 Clamp-On Leak Sensor 1 A, 45 to 66 Hz
Miscellaneous
For connecting to an input
module for voltage mea-
surement
(1) 9555-01 Sensor Unit *
for Model 9272-10, 9277 to 9279, 9709,
CT6862, CT6863
For connecting to the Model
8971 Current Unit
(2) 9318 Conversion Cable
for Model 9272-10, 9277 to 9279, 9709,
CT6862, CT6863
* : Not applicable to CE Marking
Printer
Recording Paper
9231 Recording Paper
One set of 6 rolls, 30 m
TEPTOM-220H Paper Winder*
(Auto winder for recording paper)
Storage medias
Drives
9664 HD Unit
Internal Hard Disk Drive, specify when order-
ing
PC Card
9726 PC Card 128M 128MB, with adapter
9727 PC Card 256M 256MB, with adapter
9728 PC Card 512M 512MB, with adapter
9729 PC Card 1G 1GB, with adapter
9830 PC Card 2G 2GB, with adapter
Software
Application Software
9335 Wave Processor
Others
Power Supply
9784 DC Power Unit
Power supply for DC operation , specify when
ordering
Case
9783 Carrying Case with casters
To Next Page
Loading...