5.5 Managing Files
82
(When [Text] is the selected save type)
Set the data thinning number.
Move the cursor to the [Save Thin] item.
7
Select the channels to save.
Move the cursor to the save channel item.
8
Execute the save operation.
Select [Exec].
To cancel saving:
Select [Cancel].
Off Data thinning (sub-sampling) is not carried out.
1/2 to 1/1000
Set the thinning number (out of how many data items to
leave one data item remaining).
- Channel will not be saved.
o
Channel will be saved.
Reset
Return to previous settings.
When saving settings data, a set-
tings file for automatic loading of
settings can be created as follows:
Specify the folder [HIOKI8847] on
the CF card as save target folder
and use [STARTUP] as [Save
Name].
See: "5.4 Automatically Loading
Settings (Auto Setup Func-
tion)" (
p.79)
Analog
Channels
Logic
Channels
Waveform Calculation
(When [Wave Calculation] is [On])
File name
The maximum number of characters for the [Save Name] string is 123. The
maximum path length including file name is 255 characters.
About divided saving
Large quantities of waveform data can be divided and saved as multiple files.
Saving divided data creates one or more waveform files and an index (IDX) file.
Then by loading the IDX file, the data in the waveform file(s) is loaded as a
batch.
See: "Batch load of waveform data" ( p.78)
Other limitations
Text format data cannot be loaded into the 8847.
To Next Page
Loading...