HP E4418B - Page 286

prog.book : ch7mem.fm 23 Mon Feb 15 09:24:37 1999
MEMory Subsystem
MEMory:TABLe:FREQuency <numeric_value>{,<numeric_value>}
HP E4418B/E4419B Programming Guide 7-23
Parameters
Example
Query
MEMory:TABLe:FREQuency?
The query returns a list of frequency points for the table currently
selected. The frequencies are returned in Hz.
Query Example
1. The following measurement units can be used:
•Hz
• kHz (10
3
)
• MHz (10
6
)
• GHz (10
9
)
2. All frequencies are truncated to a multiple of 1 kHz.
Item Description/Default Range of Values
numeric_value A numeric value for the frequency. The
default units are Hz.
1 kHz to
999.9 GHz
1, 2
MEM:TABL:FREQ 200kHz,600kHz This command enters
frequencies of 200 kHz and
600 kHz into the currently
selected table.
MEM:TABL:FREQ? This command queries the
frequency points in the currently
selected table.