To Next Page

To Previous Page

117

[RouterB-MFR2] quit

# Add Serial 2/0 and Serial 2/1 to interface MFR1.

[RouterB] interface serial 2/0

[RouterB-Serial2/0] link-protocol fr mfr 1

[RouterB] quit

[RouterB] interface serial 2/1

[RouterB-Serial2/1] link-protocol fr mfr 1

[RouterB-Serial2/1] quit

# Add Serial 2/2 and Serial 2/3 to interface MFR2.

[RouterB] interface serial 2/2

[RouterB-Serial2/2] link-protocol fr mfr 2

[RouterB-Serial 2/2] quit

[RouterB] interface serial 2/3

[RouterB-Serial2/3] link-protocol fr mfr 2

[RouterB-Serial2/3] quit

# Configure static route for frame relay switching.

[RouterB] fr switch pvc1 interface mfr 1 dlci 100 interface mfr 2 dlci 200

3. Configure Router C:

# Configure interface MFR2.

<RouterC> system-view

[RouterC] interface mfr 2

[RouterC-MFR2] ip address 1.1.1.2 255.0.0.0

[RouterC-MFR2] quit

# Add Serial 2/0 and Serial 2/1 to interface MFR2.

[RouterC] interface serial 2/0

[RouterC-Serial2/0] link-protocol fr mfr 2

[RouterC-Serial2/0] quit

[RouterC] interface serial 2/1

[RouterC-Serial2/1] link-protocol fr mfr 2

HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

Other manuals for HPE FlexNetwork MSR Series