HPE FlexNetwork MSR Series

293
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enable bridging.
bridge enable
Bridging is disabled by default.
3. Enable a bridge-set.
bridge
bridge-set
enable
A bridge-set is disabled by
default.
4. Enter interface view.
interface
interface-type
interface-number
N/A
5. Add the interface to the
bridge-set.
bridge-set
bridge-set
No interface is in any bridge-set
by default.
6. Enable VLAN transparency.
bridge
vlanid-transparent-transmit
enable
VLAN transparency is disabled by
default.
Displaying and maintaining bridging
Task Command Remarks
Display bridge set information.
display bridge information
[
bridge-set
bridge-set ] [
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view.
Display information about
bridge-template interfaces.
display interface
bridge-template
interface-number [
brief
] [
|
{
begin
|
exclude
|
include
}
regular-expression ]
display interface
[
bridge-template
] [
brief
[
down
] ] [
|
{
begin
|
exclude
|
include
} regular-expression ]
Available in any view.
Display bridge table information.
display bridge address-table
[
bridge-set
bridge-set |
dlsw
|
interface
interface-type
interface-number |
mac
mac-address] [
dynamic
|
static
]
[
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view.
Display bridged traffic statistics.
display bridge traffic
[
bridge-set
bridge-set |
dlsw
|
interface
interface-type
interface-number ] [
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view.
Clear dynamic bridge table
entries.
reset bridge address-table
[
bridge-set
bridge-set |
dlsw
|
interface
interface-type
interface-number ]
Available in user view.
Clear bridged traffic statistics.
reset bridge traffic
[
bridge-set
bridge-set |
dlsw
|
interface
interface-type interface-number ]
Available in user view.