HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

374
Analysis
The physical status and protocol status of the interface are not up, or the SVC/XOT configuration is
not correct.
Solution
Perform the following procedure to remove the fault:
• Verify the physical connection status and protocol status of the interface are UP.
• If the interface status is DOWN, check whether the physical connections and lower layer
configurations are correct.
• If the interface configuration is correct, check whether SVC is configured correctly.
• If the SVC configuration is also correct, check whether XOT is configured correctly.
Failed to ping XOT PVCs
Symptom
XOT PVCs cannot be pinged.
Analysis
The physical status and protocol status of the interface are not up, or the PVC/XOT configuration is
not correct.
Solution
Perform the following procedure to remove the fault:
• Determine whether the physical connection status and protocol status of the interface are UP.
• If the interface status is DOWN, check for physical connection and lower layer configuration
errors.
• If the interface configuration is correct, check for PVC configuration errors.
• If the PVC configuration is correct, check for XOT configuration errors.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English