HPE FlexNetwork MSR Series User Manual

193
Figure 209 Network diagram
Configuring DDNS on the router
Before configuring DDNS on Router, register at http://www.3322.org/ (username steven and
password nevets in this example), add Router's host name-to-IP address mapping to the DNS
server, and make sure the devices are reachable to each other.
1. Enable dynamic domain name resolution and set the IP address of the DNS server to 1.1.1.1.
(Details not shown.)
2. Configure DDNS:
a. From the navigation tree, select Advanced > DNS Setup > DDNS Configuration.
b. Click Add to enter the page.
c. Enter 3322 in Domain Name
d. Select 3322.org from the Server Provider list.
e. Enter steven in Username.
f. Enter nevets in Password and select Ethernet0/1 from the Associated Interface list.
g. Enter whatever.3322.org in FQDN.
h. Click Apply.
Figure 210 Configuring DDNS

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English