HPE FlexNetwork MSR Series - Page 25

10
Function menu Description
User
level
MSR30, and
MSR50)
Allows you to configure
SNMP.
Configure
Community
Displays the brief
information of SNMP
communities.
Monitor
Allows you to create, modify
and remove an SNMP
community.
Configure
Group
Displays the brief
information of SNMP
groups.
Monitor
Allows you to create, modify
and remove an SNMP
group.
Configure
User
Displays the brief
information of SNMP users.
Monitor
Allows you to create,
modify, and remove an
SNMP user.
Configure
Trap
Displays the status
(enabled or disabled) of the
SNMP trap function and
target host information.
Monitor
Allows you to enable or
disable the SNMP trap
function; create, modify,
and remove a target host.
Configure
View
Displays the brief
information of SNMP views.
Monitor
Allows you to create,
modify, and remove an
SNMP view.
Configure
Bridge
Global Config
Displays and allows you to
set global bridging
information.
Configure
Config Interface
Displays and allows you to
set interface bridging
information.
Configure
Security UserGroup
Group
Displays user group
configuration.
Monitor
Allows you to configure
user groups.
Configure
User
Displays user configuration. Monitor
Displays users. Configure
WAN
Synchro
nization
Allows you to synchronize
the user group
configuration to a WAN
interface.
Configure