154
Figure 540 Adding a user
Table 206 Configuration items
Item Description
Username Enter the name of the user.
Password
Set a user password and confirm it.
IMPORTANT:
The leading spaces (if any) of a password will be omitted.
Confirm Password
VLAN
Enter an authorized VLAN ID for the user.
IMPORTANT:
If the access device does not support authorized VLANs, users with the
authorized VLAN ID specified cannot pass authentication.
ACL
Enter an authorized ACL number for the user.
IMPORTANT:
If the access device does not support authorized ACL properties, users with the
authorized ACL specified cannot pass authentication.
Expire Time
Set the time when the user becomes invalid, in the format of
HH:MM:SS-YYYY/MM/DD.
A user whose system time is later than the preset expire time cannot pass
authentication.
Description Enter the user information.
User-type
Select a user type, which can be a common user or guest administrator.
The guest administrator can obtain the passwords of guest users. For more
information, see "
How the guest administrator obtains the guest password
."
Batch importing and exporting RADIUS users
Select WiNet from the navigation tree, and click the User Management tab to enter the page as
shown in Figure 539.
1. Click Expor
t and
click Save in the dialog box that appears.
To Next Page
Loading...
Need help?
General
