HPE FlexNetwork MSR Series

318
27. Enter 1.1.1.1 for Destination Address.
28. Click Apply.
Configuring Router B
# Configure a local call number.
1. Select Voice Management > Local Number from the navigation tree and click Add.
Figure 711 Configuring a local number
2. Enter 1000 for Number ID.
3. Enter 1000 for Number.
4. Select subscriber-line 8/0 from the Bound Line list.
5. Click Apply.
# Configure a call route.
6. Select Voice Management > Call Route from the navigation tree and click Add.
Figure 712 Configuring a call route
7. Enter 2000 for Call Route ID.
8. Enter 2000 for Destination Number.
9. Select SIP for Call Route Type.
10. Select Proxy Server for SIP Routing.
11. Click Apply.